Lotus is an interesting addition to your collection! This post covers only pre-treated lotus seeds. (Seeds that has been cracked open at one end to promote germination rate.)
Here are the steps for direct germination :
Preparation:
1. A bowl that is 20-25cm in diameter and 15-25 cm deep.
2. Lotus seeds
3. Tap water
Steps:
1.Soak the Ginkgo in the bowl with room temperature tap water. Ideal room temperature is 20-30 Degree Celsius. The water should at least cover the seeds by 1 inch.
2. Change water twice a day to ensure the water is fresh.
3.Germination should occurs in 7-10 days.
4.Once germinated,move the seedlings to place where it can receive plenty of sunlight.
5.The first leaf and roots should starts to grow in 2-3 weeks.
Showing posts with label Gardening. Show all posts
Showing posts with label Gardening. Show all posts
10/09/2013
Ginkgo Seeds Germination
If your Ginkgo seeds are fresh ,cold stratification can be skipped - you can soak the seeds in water first and germinate them directly in compost.
Steps:
Here are the steps for direct germination :
Preparation:
Preparation:
1. Potting mix (detailed in the product listing information and on the seed package).Basically,ask the nursery for a general purpose compost should fits well. Preferably,add about 20% of coarse sand (or any sandy soil) to achieve better drainage).The compost should be neutral and a bit sandy. To minimize possible molding problem, make sure the compost you bought is sterile (most commercial compost are). Preferably, buy a new pack instead of using an already opened one.
2. Seed Tray.
3. A bucket filled with cold tap water enough to cover the seeds by at least 2 inches.
Steps:
1.Soak the Ginkgo seeds in the water bucket filled with cold tap water for 48 hours. (The water should cover the seeds by at least 2 inches.)Do not change the water during this period even if the water gets a bit muddy.
2. After 48 hours,rinse the Ginkgo seeds gently.
3. Sow your seeds on to the top layers of your growing medium in your pot or in seed trays. Cover the seeds with a layer of soil - 3-4 cm.
4. Light can enhance germination. Try putting the seed tray or pot under sunlight as much as possible.
5. Maintain a medium level of humidity for the germination by regular watering.
6. Germination of this type of seed should naturally occurs in 4-8 weeks.
Notes:
1. Do not plant the seeds or seedlings under extremely temperature. Temperature below 15 degree Celcius or above 30 degree Celcius normally guarantee a poor result.
8/14/2013
Peony/ Garden Peony Germination
A prior treatment with Stratification (mimicking winter to encourage germination for certain types of seeds) is necessary for most Peony / Garden Peony seeds to achieve high germination rate.
Here are the steps for stratification:
Preparation for Stratification:
1. Zip loc bag
2. Some moist kitchen paper
3. Plant labels
4. 10% Hydrogen peroxide solution(common bleach) *optional but recommended
5. Sieve
6. A pair of gardening gloves
7. A pair of Tweezers
Steps for Stratification:
1. Rinse the Peony/Garden Peony seeds gently in a sieve.
2. Use a gardening gloves and soak the Peony/Garden Peony seeds into the 10% hydrogen peroxide solution for about 10 minutes.* This step is optional but it helps prevent possible molding drastically.
3. Pick up the seeds with a pair of tweezers and put them into a moist kitchen paper, then put them into a zip loc bag. Finish by labeling them and then refrigerate them. (Do not put into a freezer. Let them stay in the lower part of a refrigerator - the part where you usually store vegetables or fruit will be fine.)
4. Sprouting should start in 4-8 weeks, depending on the variety. Some variety takes up to months to start germination. Check for germination once a week and if necessary ,moisturize the kitchen paper to maintain humidity.
*If you prefer not to use stratification,starts here:
Here are the steps for direct germination or transferring of seedlings after stratification:
Preparation:
Here are the steps for direct germination or transferring of seedlings after stratification:
Preparation:
1. Potting mix (detailed in the product listing information and on the seed package).Basically,ask the nursery for a compost for Peony/Garden Peony should fits well. The compost should be neutral and a bit sandy. To minimize possible molding problem, make sure the compost you bought is sterile (most commercial compost are). Preferably, buy a new pack instead of using an already opened one.
2. Seed Tray.
3. 10% Hydrogen peroxide solution(common bleach) *optional but recommended
4. Gardening glove
5. A pair of Tweezers
6. Copper based fungicide
7. Sieve
7. Sieve
Steps:
1. Rinse the Peony/Garden Peony seeds gently in a sieve.
2. Use a gardening glove and soak the rose seeds into the 10% hydrogen peroxide solution for about 10 minutes.* This step is optional but it helps prevent possible molding drastically.
2. Use a gardening glove and soak the rose seeds into the 10% hydrogen peroxide solution for about 10 minutes.* This step is optional but it helps prevent possible molding drastically.
3. Pick up the seeds with a pair of Tweezers. Sow your seeds on to the top layers of your growing medium in your pot or in seed trays. Cover the seeds with a very thin layer of soil - not more than 1 cm.
*If you have already treat the seeds with stratification,starts here: transfer the seedlings with a pair of tweezers and plant them into the soil.
*If you have already treat the seeds with stratification,starts here: transfer the seedlings with a pair of tweezers and plant them into the soil.
4. Light can enhance germination. Try putting the seed tray or pot under sunlight as much as possible.
5. Maintain a medium level of humidity for the germination by regular watering.
6. Germination of this type of seed should naturally occurs in 4-8 weeks.
7. (Optional but recommended)Once germinate, or after transferring seedlings from stratification,use a Copper based fungicide to prevent molding problems. Follow instruction on the fungicide label for amount and frequency of application.
Notes:
1. Do not plant the seeds or seedlings under extremely temperature. Temperature below 15 degree Celcius or above 30 degree Celcius normally guarantee a poor result.
Rose /China Rose seeds germination
A prior treatment with Stratification (mimicking winter to encourage germination for certain types of seeds) is necessary for most rose seeds to achieve high germination rate.
Here are the steps for stratification:
Preparation for Stratification:
1. Zip loc bag
2. Some moist kitchen paper
3. Plant labels
4. 10% Hydrogen peroxide solution(common bleach) *optional but recommended
5. Sieve
6. A pair of gardening gloves
7. A pair of Tweezers
Steps for Stratification:
1. Rinse the rose seeds gently in a sieve.
2. Use a gardening gloves and soak the rose seeds into the 10% hydrogen peroxide solution for about 10 minutes.* This step is optional but it helps prevent possible molding drastically.
3. Pick up the seeds with a pair of tweezers and put them into a moist kitchen paper, then put them into a zip loc bag. Finish by labeling them and then refrigerate them. (Do not put into a freezer. Let them stay in the lower part of a refrigerator - the part where you usually store vegetables or fruit will be fine.)
4. Sprouting should start in 1-2 weeks, depending on the variety. Some variety takes up to months to start germination. Check for germination once a week and if necessary ,moisturize the kitchen paper to maintain humidity.
*If you prefer not to use stratification,starts here:
Here are the steps for direct germination or transferring of seedlings after stratification:
Preparation:
Here are the steps for direct germination or transferring of seedlings after stratification:
Preparation:
1. Potting mix (detailed in the product listing information and on the seed package).Basically,ask the nursery for a compost for Rose should fits well. The compost should be slightly acidic. To minimize possible molding problem, make sure the compost you bought is sterile (most commercial compost are). Preferably, buy a new pack instead of using an already opened one.
2. Seed Tray.
3. 10% Hydrogen peroxide solution(common bleach) *optional but recommended
4. Gardening glove
5. A pair of Tweezers
6. Copper based fungicide
7. Sieve
7. Sieve
Steps:
1. Rinse the rose seeds gently in a sieve.
2. Use a gardening glove and soak the rose seeds into the 10% hydrogen peroxide solution for about 10 minutes.* This step is optional but it helps prevent possible molding drastically.
2. Use a gardening glove and soak the rose seeds into the 10% hydrogen peroxide solution for about 10 minutes.* This step is optional but it helps prevent possible molding drastically.
3. Pick up the seeds with a pair of Tweezers. Sow your seeds on to the top layers of your growing medium in your pot or in seed trays. Cover the seeds with a very thin layer of soil - not more than 5mm. *If you have already germinate the seeds with stratification, transfer the seedlings with a pair of tweezers and plant them into the soil.
4. Light can enhance germination. Try putting the seed tray or pot under sunlight as much as possible.
5. Maintain a medium level of humidity for the germination by regular watering.
6. Germination of this type of seed should naturally occur in 2-8 weeks.
7. (Optional but recommended)Once germinate, or after transferring seedlings from stratification,use a Copper based fungicide to prevent molding problems. Follow instruction on the fungicide label for amount and frequency of application.
Notes:
1. Do not plant the seeds or seedlings under extremely temperature. Temperature below 15 degree Celcius or above 30 degree Celcius normally guarantee a poor result.
8/01/2013
Succulent seeds germination
Succulent seeds germination
Preparation:
1. Potting mix (detailed in the product listing
information and on the seed package).Basically, any
'cactus mix' from nursery should fit well. To minimize
possible molding problem, make sure the compost you bought is sterile (most
commercial compost are). Preferably, buy a new pack instead of using an already
opened one.
2. Seed Tray.
Steps:
1. Sow your seeds on to the top layers or on the
surface of your growing medium in your pot or in seed trays. Cover
the seeds with a very thin layer of soil - not more than 2mm.
2. Strong light can enhance germination. Try putting the
seed tray or pot under full light as much as possible. Use artificial light to
stimulate germination if necessary.
3. Maintain a low humidity for the germination
by regular watering. Do not over water as this is a succulent
species - they generally do not tolerate over watering.
4. Germination of this type of seed should
naturally occur in 2-4 weeks.
Notes:
1. Do not bury the seed too deep as succulent
cactus cannot germination in such condition.
2. Most succulent
seeds has higher germination rate at 15-25 degree Celsius. Germination attempt
made during high temperature season (32 degree or above) normally guarantee a poor
result.
Labels:
Cactus,
Gardening,
germination,
nursery,
Pauling Garden,
plants,
seeds,
Succulent
Welcome to Pauling Garden !
Hi !
Welcome to Pauling Garden. We are an online nursery who focus on providing varies types of seeds and other nursery items.
In this blog we would regularly update germination instruction and growing tips.
We wish you every success with your gardening!
Leave us a comment anytime with your gardening questions or just to say hi!
Good day!
Pauling Garden
Welcome to Pauling Garden. We are an online nursery who focus on providing varies types of seeds and other nursery items.
In this blog we would regularly update germination instruction and growing tips.
We wish you every success with your gardening!
Leave us a comment anytime with your gardening questions or just to say hi!
Good day!
Pauling Garden
Subscribe to:
Posts (Atom)